Rev-a-shelf 4WV-Series Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Zuhause Rev-a-shelf 4WV-Series herunter. Rev-A-Shelf 4WV-Series User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
WOVEN BASKET INSTALLATION INSTRUCTIONS
ESTIMATED ASSEMBLY TIME:
20 MIN
CARE AND MAINTENANCE:
Clean basket and wood frame with a damp cloth and wipe parts
dry. machine wash liner in cold water with like colors.
2409 Plantside Dr., Jeersontown, KY 40299
800.626.1126
www.rev-a-shelf.com
TOOLS REQUIRED:
1) Measure the inside cabinet width (ICW) at desired height for wood rails.
2) Measure the width of basket wood frame (BW).
3) Subtract BW from ICW. Divide answer by 2. Subtract 1/16” from answer.
This will give you the dimension needed from bottom of groove to back of wood
rail (ICW-BW) ÷ 2 - 1/16”.
4) Cut wood rails per steps 1-3.
5) Place rst cut rail in cabinet with front of rail against back of face frame (for
frameless cabinets, ush with front of cabinet.) at desired height. Secure the front
hole with proper size screw. (Screws not included due to variant in cabinet wall
thicknesses) (Make sure screw does not go through outside wall of cabinet).
Part list:
NOTE: SCREWS NOT INCLUDED DUE TO VARIANT SIZES IN CABINETS
(ICW-BW) ÷ 2 - 1/16”
Desired Height
of Rail
Inside
Cabinet
Width
(ICW)
Basket
Width
(BW)
Bottom of groove
Back of wood rail
8) Install second rail on opposite side of cabinet per steps 5-6 at height
location from step 7.
7) Measure from oor of cabinet to bottom of installed rail.
6) Make sure rail is level, then secure to cabinet with screws at
remaining hole locations.
9) Slide in basket.
I-4WV-TRI-1013
Bottom of
rail to oor of
cabinet
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - Back of wood rail

WOVEN BASKET INSTALLATION INSTRUCTIONSESTIMATED ASSEMBLY TIME:20 MINCARE AND MAINTENANCE:Clean basket and wood frame with a damp cloth and wipe parts

Seite 2 - Desired Height

8) Instale el segundo riel en el lado opuesto del gabinete por los pasos 5 y 6 a la ubicación de la altura del paso 7.Installez le second rail sur le

Kommentare zu diesen Handbüchern

Keine Kommentare